GE Fanuc IC693BEM333 FIP Interface Module

GE Fanuc IC693BEM333 Remote FIP Interface Module | Series 90-30 PLC

Product Overview

The IC693BEM333 connects Series 90-30 PLCs to a FIP network.

It allows data transfer between field devices and the controller.

The module runs at 1 MHz transmission speed.

It has 2 × 9-pin D-type ports on the front panel.

There are 4 status LEDs labeled CD1, TEN1, CD2, and TEN2.

The unit is powered from the backplane of the PLC chassis.

Install the module in any slot except Slot 1 reserved for CPUs.

Do not insert or remove the module with power applied.

Main Features

✔ Enables FIP communication with Series 90-30 PLCs

✔ Handles analog, discrete, and special device data

✔ Compact single-slot module design

✔ Simple installation with backplane power

✔ Front LEDs for fast status checks

Technical Specifications

Brand: GE Fanuc

Model: IC693BEM333

Series: Series 90-30

Component type: Remote FIP Interface

Protocol: Factory Instrumentation Protocol (FIP)

Transmission speed: 1 MHz

Serial ports: 2 × 9-pin D-type connectors

Status LEDs: 4 (CD1, TEN1, CD2, TEN2)

Backplane power: 5 VDC

RX3i support: Not supported

IP rating: IP20

Installation Notes

Insert the module only with power off.

Do not install it in Slot 1 of the PLC chassis.

Use a closed control panel to protect against dust and moisture.

Climate-controlled enclosures extend module service life.

Keep the module away from heat, dirt, and outdoor conditions.