Bently Nevada | 330104-00-22-10-01-05 | New Armored Probes

Bently Nevada 330104-00-22-10-01-05: 3300 XL 8mm Proximity Probe

What It Is

A reliable sensor for industrial measurements (no contact needed). Made with a PPS tip and stainless steel case (AISI 303/304). Sealed with a Viton® O-ring to handle pressure. Certified for hazardous areas (CSA, ATEX, IECEx).

Model Code Breakdown

• 330104 – Base: 3300 XL 8mm Probe (M10x1 thread, armored)
• -00: No unthreaded length (0mm)
• -22: Case length – 220mm
• -10: Total cable length – 1.0m (3.3ft)
• -01: Connector – Miniature coaxial ClickLoc (with protector, standard cable)
• -05: Approvals – CSA, ATEX, IECEx

Key Specs

Brand: Bently Nevada
Model: 330104-00-22-10-01-05
Type: 3300 XL 8mm Proximity Probe
Probe Resistance: 7.59 ± 0.50Ω (1.0m cable)
Output Resistance: 50Ω (stable signal)
Voltage Sensitivity: <2mV change per volt (consistent performance)
Power: -17.5Vdc to -26Vdc (nonincendive); -23Vdc to -26Vdc (with barriers)
Temp Range: -55°C to +232°C (T1) to -55°C to +40°C (T5) (probe only)

How to Install

Install with:

Nonincendive circuits (Drawing 140979)
Zener barriers/isolators (Drawing 141092)
Gap at 1.27mm (50 mils) with AISI 4140 steel target for best results.

Works With

3300-series 5mm probes and 3300 XL 8mm extension cables. Accuracy only works with AISI 4140 steel targets.

Safety Ratings

Certified for hazardous areas (CSA, ATEX, IECEx):

Safe for gas/dust (Class I Zone 0 Ga)
General use (Class I Zone 2 Gc)
Dust/flake (Class II/III)

What’s Included

1x 3300 XL 8mm Probe, 1x Miniature coaxial ClickLoc connector (with protector), 1x 1.0m standard cable.

Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet