Bently Nevada 330709-000-060-90-02-00 Probe: For Better Machine Checks
What is This Probe?
This is a Bently Nevada 3300 XL 11 mm Proximity Probe. Made in the USA, it helps check machine parts like shafts. Works well in factories, power plants, and more. Model number: 330709-000-060-90-02-00.
Key Numbers You Need to Know
Size: 60mm case length, 9m cable (29.5ft)
Resistance: 8.5 ohms (with 1.1 ohm change)
Temperature: Works from -52°C to 177°C. Cold below -34°C may break seals.
Cable: 75Ω triaxial, FEP-insulated. Also available in 1m/5m.
How to Install It
Thread: M16x1.5 (screw type). Screw up to 24mm deep.
Torque: Tighten case with 63.3 N•m (560 in•lb). Connectors: Finger-tight (max 0.565 N•m).
Bend: Don’t bend less than 25.4mm (1in) – even with armor.
Why Bently Nevada?
Bently Nevada has 50+ years making machine tools. Over 10,000 factories use their probes. This probe uses:
Tip: PPS (strong plastic, resists heat).
Case: 304 stainless steel (no rust).
Cable: FEP insulation (works in harsh places, 500V max voltage).
What’s in the Box
1 probe unit
9m FEP-insulated cable
1 ClickLoc connector
1 user guide (simple steps for setup)
Download PDF file here:3300 XL 11 mm Proximity Transducer System Datasheet
No products in the cart.