Bently Nevada | 330103-00-14-10-02-CN | 8 mm Proximity Probes

Bently Nevada 330103-00-14-10-02-CN: 3300 XL 8 mm Proximity Probe

Model Number Breakdown

• 330103: Base 8 mm probe with M10×1 thread (no armor)
• 00: No unthreaded section (0mm)
• 14: Compact probe body (14mm long)
• 10: Short cable (1.0m / 3.3ft)
• 02: Mini ClickLoc connector with standard cable
• CN: Country-specific safety approval

Key Features

Measure Range: 2mm (80 mils) – works from 0.25mm (10 mils) to 2.3mm (90 mils).
Best Gap: -9 Vdc (~1.27mm/50 mils) for vibration checks.
Cable Resistance: 7.59 ± 0.50Ω (1.0m cable).

Materials

Tip: PPS (heat/chemical resistant plastic).
Body: Stainless steel (303/304, rust-proof).
Seal: Viton® O-ring (stops pressure leaks). Not pre-tested – ask for tests if needed.

Working Conditions

Temperature:

Normal use: -52°C to +177°C (-62°F to +350°F).
Tip (extra): -52°C to +218°C (-62°F to +425°F).
Cable/connector (extra): -51°C to +260°C (-60°F to +500°F).
Humidity: Stays accurate (change <3%) at 93% humidity (56 days).

Installation Guide

Wiring: Use 0.2–1.5 mm² (16–24 AWG) wires. 3-conductor shielded triad is best.
Max Wire Length: 305m (1,000ft) from probe to monitor. Long wires may lose high-frequency signals.

Safety Approvals

Intrinsically Safe (ia): Works in Class I Zone 0, Groups A/B/C/D, etc.
Nonincendive (nA/ec): Safe for Class I Zone 2, Division 2.
Extra Approval: Passes country-specific (CN) safety rules.

Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet