Bently Nevada | 3300 5mm Proximity Probes – 330173-00-06-10-12-00

Bently Nevada 3300 Series FluidLoc Proximity Sensor

Advanced 5mm vibration probe with FluidLoc cable technology for critical industrial monitoring applications. Made in USA.

Product Identification

Manufacturer: Bently Nevada
Full Model: 330173-00-06-10-12-00
Sensing Diameter: 5mm
Thread Type: M8×1
Cable Technology: FluidLoc sealed system

Performance Specifications

Operating Gap: 1.27mm (50 mils)
Voltage Range: -17.5Vdc to -26Vdc
Current Draw: 12mA maximum
Temp Range: -35°C to +177°C
Critical Note: Avoid below -34°C to prevent seal damage

Physical Construction

• Case Length: 60mm stainless steel
• Tip Material: PPS polymer
• Cable Length: 1.0 meter FluidLoc
• Connector: ClickLoc miniature coaxial
• Weight: 323 grams

Electrical Properties

• Output Resistance: 50Ω
• Probe Resistance: 7.59±0.50Ω
• Insulation: FEP triple-layer
• Sensitivity: <2mV/V variation

Installation Requirements

1. Mount with M8×1 threading
2. Maintain 1.27mm target gap
3. Apply 5.1 N·m installation torque
4. Keep minimum 25.4mm cable bend
5. Use AISI 4140 steel targets

System Compatibility

Direct integration with Bently Nevada 3300/3500 monitoring systems. Ideal for:

• Gas and steam turbines
• Centrifugal compressors
• High-speed pumps
• Generator sets

Certifications & Origin

No agency approvals required. Manufactured in USA with available Certificate of Origin.

Package Contents

• Probe assembly (60mm case)
• 1.0m FluidLoc triaxial cable
• ClickLoc connector set
• Installation documentation

Warranty Terms

12-month comprehensive warranty covering materials and workmanship defects.

Industrial Applications

Power Plant: Turbine shaft vibration monitoring at 3000 RPM
Refinery: Compressor thrust position measurement
Water Treatment: Pump bearing health analysis with 0.1mm resolution

Download PDF file here:3300 5 mm Transducer System Datasheet – 172036