Armored Proximity Probe 330704-000-050-10-02-CN Bently Nevada

Bently Nevada 330704-000-050-10-02-CN | 3300 XL 11mm Metric Proximity Probe

What It Is & Why It Matters

This Bently Nevada 3300 XL 11mm Proximity Probe (Part No.: 330704-000-050-10-02-CN) helps factories check machine parts safely. It measures vibration, movement, and position without touching. New, factory-sealed, with 12-month warranty.

Top Features at a Glance

Tough Design: Armor-covered M14×1.5 threaded case for rough use.
Flexible Lengths: 1m (3.3ft) cable (other options: 5m/9m) with small ClickLoc connector.
Wide Heat Range: Works from -52°C (-62°F) to 177°C (351°F).
Safe for Hazards: CSA, ATEX, IECEx certs (CN country-specific approval included).

Tech Details You Need

Electric: 75Ω triaxial cable (FEP insulation); 5.9±0.5Ω resistance (1m probe).
Magnet: Low output (max 0.027 mil pp/gauss at 4.6mm gap, 300 Gauss 60Hz).
Materials: PPS tip (strong plastic); AISI 304 stainless steel case (rust-proof).
Torque: Max 63.3N•m (560in•lb); safe use at 21.1N•m (187in•lb).

Install & Use Tips

Thread Fit: M14×1.5 thread, max 21mm tight.
Avoid Cold: Keep above -34°C (-30°F) to stop seal damage.
Works With: Bently Nevada 3500 systems and API 670 setups.

Warranty & Pack

New & Sealed: Factory packing, never used.
Covered: 12-month warranty (starts on purchase date).

Where Factories Use It

Turbines: Check part movement and expansion.
Compressors: Track piston rods.
Fans/Pumps: Watch for shaking.
Machines: Measure speed via key signals.
Download PDF file here:3300 XL 11 mm Proximity Transducer System Datasheet