Armored Probe | Bently Nevada – 330104-00-16-10-02-00

Bently Nevada 3300 XL 8mm Proximity Probe – Model 330104-00-16-10-02-00

What It Is

A rugged, non-contact sensor built for reliable industrial gap measurements. This 8mm probe from Bently Nevada features an armored body, a PPS (polyphenylene sulfide) tip for stability, and a stainless steel case. A Viton® O-ring seals pressure between the tip and case, ensuring long-term performance.

Technical Details

Brand: Bently Nevada
Model: 330104-00-16-10-02-00
Type: 3300 XL 8mm Proximity Probe
Resistance: 7.59Ω (±0.50Ω) for 1.0m cable
Power Supply: -17.5Vdc to -26Vdc (12mA max; -23Vdc to -26Vdc with barriers)
Sensitivity: <2mV output change per volt input
Output Resistance: 50Ω
Operating Temp: 18°C–27°C (64°F–80°F)
Max Altitude: 2000 meters
Best Target: AISI 4140 steel (for top accuracy)
Tip Material: PPS
Case Material: AISI 303/304 stainless steel

Model Number Breakdown

Each part of the model number shows key features:

330104: Base 8mm probe with M10x1 thread and armored design
00: Unthreaded length (0mm)
16: Overall case length (160mm)
10: Total cable length (1.0m/3.3ft)
02: Mini coaxial ClickLoc connector (standard cable)
00: No specific agency approvals required

Installation Steps

Use with a -24Vdc power supply and 10kΩ load.
Set the probe gap at 1.27mm (50 mils) from AISI 4140 steel.
Avoid voltages above -23.5Vdc to keep full measurement range.

Compatibility

Only works with 3300 XL 8mm components (probe, extension cable, proximitor). Accuracy may drop if used with targets not made of AISI 4140 steel.

Certifications

No specific agency approvals required (model suffix 00).

What’s in the Box

3300 XL 8mm Probe
Mini coaxial ClickLoc connector
1.0m standard cable
Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet